Welcome to Colloidal
Silver Therapy Articles
at Natural Earth |
SUBMIT AN ARTICLE
If you are an organisation or individual with considerable
experience in this field and would like to submit an article providing
information about your area of specialization then please email Alex
- admin@natural-earth.com. We will be happy to publish well written
informative information about any specialized natural health, alternative
medicine and lifestyle area., and we will provide a link back to your
website.
Click on the article you would like to read.
Colloidal Silver - Things to Look For
By Simon Brown
Colloidal Silver and Your Health
By Matthew Sirpis
Making Colloidal Silver
By Steve Valentino
Colloidal Silver - Things to Look For By Simon
Brown
Things to look out for when purchasing.
There are many different brands of Colloidal Silver around at the
moment, more in the USA than here in the UK. Some products are more
inferior than others. Please note the following considerations before
purchasing any Colloidal Silver.
Always purchase Colloidal Silver produced by the electro-colloidal
process.
Make sure that distilled water or Reverse Osmosis/De-ionized water
is used. Either is suitable. We personally believe that RO/DI water
is better as you have total control over the quality of water you
produce.
The ideal colour should be clear or very slightly golden yellow.
Darker colours indicate particles that are too large. A good indication
of the quality of Colloidal Silver is the colour. As the size of
the particles increase the colours can be yellow, brown, red, gray
or even black. Do not purchase this type of Colloidal Silver.
Do not buy Colloidal Silver if it lists any other elements other
than silver, or contains a stabilizer.
Do not buy if the directions say you need to shake the bottle.
This indicates that the product is inferior.
If the product requires you to refrigerate it, they may mean that
there is something else added to thr Colloidal Silver that needs
refrigeration.
Ideally Colloidal Silver should be stored in amber glass bottles
to protect it from the UV rays of the sun. Plastic bottles can build
up an electrical charge that could neutralise the silver particles
in inferior Colloidal Silver. Superior Colloidal Silver shouldn't
be affected in this way.
Remember higher PPM doesn't mean the product is of higher quality.
Tests show that Colloidal Silver of around 3-10 PPM is just as effective
as Colloidal Silver of 500 PPM and more. All you will be doing is
spending much more money to buy higher PPMs without getting any
additional benefit.
Colloidal Silver should be made from pure silver of at least 99.9%
pure. We use 99.99% pure. NEVER buy or make Colloidal Silver from
Sterling Silver. This contains nickel which can be Toxic.
Simon Brown runs http://www.naturalremedies4u.com,
which contains a large amount of information on Health and Natural
Remedies. We also run http://www.colldass.co.uk and produce very
high quality Colloidal Silver and great prices. Sign up to our newsletter
to receive a complete ebook on Colloidal Silver http://be-prepared.naturalremedies4u.com
Colloidal Silver and Your Health By Matthew Sirpis
With many of today's health problems stemming from foreign parasites
such as viruses, bacteria and protozoa, can colloidal silver provide
adequate defense against such bodily invasion?
Colloidal silver is usually taken in a liquid form and is made
in distilled water with microscopic silver particles suspended in
it. The silver is put into the liquid by way of a colloidal silver
generator, which is basically 2 pure silver rods connected to a
20-21 volt source. It is important to make sure the silver is made
with distilled water and this voltage as it will ensure a small
particle size. Some people add salt to the water, but due to the
increase in conductivity of the water, the particle size is too
large, and the silver can become lodged in the body (called argyria).
Colloidal silver has some very useful properties, in that it can
help the body defend itself against bacteria, fungus and parasites.
It works by deactivating an oxygen carrying enzyme which the single
celled organisms use to 'breath', which in turn suffocates the organism.
In the case of parasites, it may not kill the parasite itself, but
it will kill all the eggs, which behave as single celled organisms.
Thus when the life cycle of the parasite itself is over, there will
be no more to take it's place.
The size of the silver particles in the water is about .001 to
.005 microns in diameter. This is smaller than any atom, and therefore
able to move freely through a persons body. The body does not recognize
the silver as foreign, so the immune system does not bother it.
When first taking colloidal silver a person may experience flu
like symptoms for a few days. This is due to the cleansing effect
of the silver. As the unfriendly organisms die off they can create
some toxicity in the body as they are removed. This is perfectly
natural and the symptoms will subside after a while, depending on
the person’s state.
Colloidal silver is useful to include daily as a part of ones health
regime as it provides like a second immune system, yet doesn't weaken
a person’s immune system like other antibiotics, and also
doesn't seem to upset the friendly bacteria in the colon. Of course
taking colloidal silver is useful, but if a person doesn't already
have a good vegetarian diet, the body will constantly be battling
with toxins and unfriendly organisms anyway. It is also important
to make sure the acid/alkaline balance of the body is correct by
eating the right amount of the right types of foods, even for vegetarians.
Although a plant based diet is healthy if done right, when not done
correctly, it can prove unhealthy also.
If a person is making the transition from an unhealthy lifestyle
and diet to a healthy one, it is recommended to do a cleanse or
detox.
Making Colloidal Silver By Steve Valentino
Colloidal silver is a product with a potent effect against pathogenic
micro-organisms. It is used as a healing agent, antiseptic, and
a deodorant. For mass production, there are commercially available
generators, however on a smaller scale, they can be created by an
individual with easily available products.
A drinkable form of the colloidal solution is made by diffusing
the silver ions in water by passing a dc electric current through
two silver electrodes dipped inside water. The simplest requirements
include a battery project case with battery holders and clip, standard
4 mm banana plugs used on most testing equipment, matching sockets,
an LED to indicate the current flow, and a resistor to allow the
desired current. The resistors can range from 1K to 10K, allowing
a current of 1mA to 10mA. The most important component is the 3mm
silver wire used to generate high-quality silver in the suspension.
This is free from impurities, unlike the sterling silver.
The apparatus is assembled completely and tested for the flow of
proper current. The silver wires are kept immersed in water. The
generation of the silver solution is an instant process. Since silver
is a light-sensitive metal, the entire process is conducted in a
dimly lit room, preferably a dark room. Once the process is complete,
the wires are cleaned with soft paper towels to keep them scratch
free. Care is taken to see that the deposits of silver oxide are
removed after each use.
Evaluation of the purity of the prepared colloidal solution can
be done by examining the back-scatter of a laser beam. The beam
is directed to pass through the solution and viewed at an angle
of 15o. This is the Tyndall or the Raleigh effect. However, it is
considered a less reliable method compared to microbiological tests.
The preparation is stored in non-conductive, dark, opaque, plastic
containers and never in metal containers.
Precautions for making silver colloid include the use of distilled
water and fine-quality silver electrodes/wires. Tap water is suitable
for topical sprays or for use in plants. Saline is added to improve
the conductivity, however it is advisable to refrain from using
salt as it affects the quality. A pinch of baking soda is used for
the generation of the first set; subsequently a small sample of
the silver colloid is used as a “starter” to initiate
the conductivity.
Generation of a silver colloid is a fairly simple process. To make
matters easier, numerous silver colloid generator kits are available
on the market.
Click
here to return to Colloidal Silver Therapy Main Page
PLEASE NOTE: Natural-Earth.com
does not necessarily endorse any of the treatments and therapies
in the natural health, natural medicine and lifestyles directory.
The material on this web site has been provided for your information
and we urge you to be discriminating in making your choice of complementary
or alternative therapy. We wish you Good Luck... and Good Health.
|